Roofing
|
This structural damage
was caused by perpetual leaking of a conventional
hot mopped roofing system. Hot and cold temperatures
will tear open tar, and will inevitably create
leaks. The complete roofing system was removed, and
structural repairs made.
|
 |
|
One of the most profound
advantages of
spray in place foam roofing systems,
is their ability to flash around ANY protrusions
though the roof. (see photos below) Not having to
mechanical re-flash the protrusions is a time and
money savings to you.
Foam offers an
air tight, continuous
seal over the complete area to be roofed. |
 |
|
The
polyurethane foam has an
extremely high R-Value, and can be built up to a
desired optimum
R-value for
insulation, as well as a
new roofing system. Your getting both for the cost
of one. |
 |
|
The final step is to apply
the
coating system over the fresh
foam. The
coatings
are fluid applied, and flow and fill any
irregularities in the
foam. There are several
coating systems available to fit the consumer needs.
From residential applications, to
industrial grades
to handle the more extreme conditions industrial
roofs require.
The finish product offers a continuous membrane of
water proofing protection. The white finish offers
high reflective properties, and keeps roof surface
temperatures much lower than dark built-up systems.
A cooler roof means less heat build up, and less
cost for air conditioning of the building.
Contact an All Tech Insulation engineer today
(989-826-9999)
for a deeper discussion about your specific requirements.
|
 |
|
|
|
|
|
 |
|
