All Tech Insulation & Steel Structures   Spray in place polyurethane foam can be used in any type of structure. The more unusual the shape, the more sense "foam " makes.       Insulating this was a "snap" using All Tech Insulation. Applying All Tech Insulation spray foam insulation in a fluid form, allows it to seal every air leak. The high R-value of the finished foam, and its air tight capabilities make it unsurpassed as a "SPACE AGE" insulation. This photo is shown with All Tech Insulation Spray-Applied Sealant (Poly-X) over the foam. It offers reduction of noise levels by 77%, and also offers a fire rating that is often required in some applications.     All Tech Insulation spray foam insulation can mimic the surface that it is being sprayed, while sealing the building air tight. Typical pole building construction takes on a whole new dimension when All Tech Insulation spray foam insulation is applied.               What can you do with that old block building that has drafts everywhere?   FOAM IT! This building was furred out with 2"x2" studs that were mechanically fastened to the block. All Tech Insulation spray-applied foam insulation was then filled in between the studs, and new siding applied to the studs. The end product was a extremely well insulated, draft proof structure that now has new life. The same can be done for older brick structures that have structural deterioration. All Tech Insulation, and new steel or vinyl siding can make a old structure ...NEW!   Contact an All Tech Insulation engineer today (989-826-9999) for a deeper discussion about your insulation requirements.